+44(0)1483 473810

Making communication clearer

TV Pro


TV listening device for use with hearing aids View more details..

In stock

$314.70 (ex. VAT) $314.70 (inc. VAT)
Be the first to review this product
Conversor TV Pro is an ideal companion for watching the television or listening to radio at home. TV Pro can help you to hear the TV more clearly. Many TVs do not have sound systems that are compatible with individuals who have a hearing loss. The speakers are either pointing at the floor or are at the back of the TV making it difficult to hear clearly without turning the volume up. Conversor TV Pro is a wireless listening device which lets you to listen to the television or other audio source without increasing the volume on the television and irritating other viewers or listeners. Simply connect the mains power, plug the TV Pro transmitter into the television, place the pendant receiver around the neck, switch the hearing aid to the telecoil setting and listen through the hearing aid or just plug in a set of headphones or earphones.
Key Features
  • Always ready

Conversor TV Pro transmitter is mains powered and can be set up once and connected to the television ready for listening and viewing.  When the television is turned off the Conversor TV Pro transmitter stops transmitting and goes into standby mode. As soon as you switch on the television it starts transmitting.

  • Automatic gain control

Conversor TV Pro automatically adjusts the transmitted signal to cope with variations in the speech to noise level on the television. For example when there is a quiet passage in a film the noise level is often quite high when using an assistive device. Conversor TV Pro reduces this noise level until speech or music resumes, making your listening experience more comfortable and enjoyable.

  • Group situations

Conversor TV Pro can be used where more than one person wants to listen to the television or audio broadcast, for example in care homes or charity groups.

Technical Information

Conversor TV Pro Technical Specifications



Housing:                                  Plastic. Matt black finish.

Dimensions:                            10.2cm (L) x 3.3cm (W) x 2.3cm (D)

Weight:                                    67 g.

VHF Frequencies:                   Channels between 216.0000 – 216.9999MHz

Channel Selection:                  PLL Synthesizer

Operating voltage:                  4.6V DC through standard mains connected PSU.

RF Power and Range:            <10mW ; Inside - 90 to 150 feet typical

Mic muting:                             Mic muted when line input is connected

Modulation:                             FM

Maximum Deviation:              +/- 15 kHz

Spurious Emission:                 Below maximum ETSI permitted limits

Frequency Stability:                < +/-5kHz (0-40 degrees Celsius)

Frequency Response:            +/- 3dB between 300Hz – 4kHz with resistive load

Line Input Sensitivity:              100mV RMS @ 10kohms, stereo mini-jack

Sensitivity:                               Soft-limited, two threshold levels line inputs.



Housing:                                  Plastic. Matt black finish.

Dimensions:                            6.5cm (L) x 3.4cm (W) x 1.7cm (D)

Weight:                                    61 g.

VHF Frequencies:                   Channels between 216.0000 -216.9999 MHz

Channel Selection:                  PLL Synthesizer. Pro auto-tune (PRAT TM)

for class selection in school application

Squelch:                                  PSSS TM circuitry switches off audio and switches

on local microphone when there is no transmission

Receive Indicator:                   LED indication of received signal

Battery Type:                          Rechargeable Li-Ion cell

Charge life:                             10 hours approx operation. LED changes from green

to red as capacity drops to 25%

Charge Time:                          2hrs from full discharge, can be topped up, can be

used for 1 hr after a 15min charge.

Frequency Stability:                < +/-5kHz (0-40 degrees Celsius)

Frequency Response:            +/- 3dB between 300Hz – 4kHz with resistive load

Audio Output:                          3.5mm 3-pole (stereo) jack socket

Distortion:                                <5% at max volume (typical <1%)

S/N ratio:                                 > 50dB

Load Impedance:                    32 Ohms

Integral Inductive Loop:          Inductive field meets

BS 6083 Part 4 in appropriate mode


Write Your Own Review

You're reviewing: TV Pro

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Brochure & User Guide

Recommended Accessories