+44(0)1483 473810

Making communication clearer

Conversor Pro Notetaking kit-1


Conversor Pro note taking kit with two receivers for use with hearing aid and smartphone View more details..

In stock

$852.37 (ex. VAT) $852.37 (inc. VAT)
Be the first to review this product
This kit is for a hearing aid wearer who wishes to listen to the speaker and record the speaker's voice at the same time. Make better notes on your smartphone or tablet using Conversor Pro as a wireless microphone and hear more clearly using an extra Conversor Pro receiver for your hearing aid. Place the Conversor Pro microphone next to the speaker and transmit their voice wirelessly to the two Conversor Pro receivers, one of which is connected to the smartphone or tablet using the Conversor cable and connection kit. The second receiver is worn around your neck and connects wirelessly to your hearing aid. Indoors the Conversor Pro receiver can be up to 40 metres(120 feet) from the transmitter making this an ideal companion in the lecture theatre or conference hall. The kit includes Notetalker App, a voice recording app for your smartphone or tablet which has unlimited audio bookmarks and a picture taking feature, and Notetalker Edit a software program for Windows and Mac PCs for making and editing your notes.
Technical Information


Housing:                                  Plastic. Matt black finish.

Dimensions:                            10.2cm (L) x 3.3cm (W) x 2.3cm (D)

Weight:                                    67 g.

VHF Frequencies:                   Channels between 169.4000 – 216.9999MHz

Channel Selection:                  PLL Synthesizer

Battery Type:                          Rechargeable Li-Ion single cell

Charge life:                             8 hours approx. Red LED battery warning

Charge Time:                          2hrs from full discharge can be topped up

RF Power and Range:            <10mW Outside; up to 300 feet.

Inside; 90 to 150 feet typical

Mic muting:                             Mic muted when line input is connected

Modulation:                             FM

Maximum Deviation:              +/- 15 kHz

Spurious Emission:                 Below maximum ETSI permitted limits

Frequency Stability:                < +/-5kHz (0-40 degrees Celsius)

Frequency Response:            +/- 3dB between 300Hz – 4kHz with resistive load

Microphone:                            Switchable omni / unidirectional

Electret microphones

Omni Field:                             Sensitive to all directions

Front to Back Ratio:                Up to 30dB reduction of rearward sound @ 1kHz

And up to 15dB reduction to the sides

Line Input Sensitivity:              100mV RMS @ 10kohms, stereo mini-jack

Sensitivity:                               Soft-limited, two threshold levels for both line

and microphone inputs.

Battery Indicator Light:            Light changes from green to red, indicating 25%

battery capacity remaining



Housing:                                  Plastic. Matt black finish.

Dimensions:                            6.5cm (L) x 3.4cm (W) x 1.7cm (D)

Weight:                                    61 g.

VHF Frequencies:                   Channels between 169.4000 -216.9999 MHz

Channel Selection:                  PLL Synthesizer. Pro auto-tune (PRAT TM)

for class selection in school application

Squelch:                                  PSSS TM circuitry switches off audio and switches

on local microphone when there is no transmission

Receive Indicator:                   LED indication of received signal

Battery Type:                          Rechargeable Li-Ion cell

Charge life:                             8 hours approx operation. LED changes from green

to red as capacity drops to 25%

Charge Time:                          2hrs from full discharge, can be topped up, can be

used for 1 hr after a 15min charge.

Frequency Stability:                < +/-5kHz (0-40 degrees Celsius)

Frequency Response:            +/- 3dB between 300Hz – 4kHz with resistive load

Audio Output:                          3.5mm 3-pole (stereo) jack socket

Distortion:                                <5% at max volume (typical <1%)

S/N ratio:                                 > 50dB

Load Impedance:                    32 Ohms

Integral Inductive Loop:          Inductive field meets

BS 6083 Part 4 in appropriate mode


Write Your Own Review

You're reviewing: Conversor Pro Notetaking kit-1

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Brochure & User Guide