- An extra receiver for your Conversor Pro assistive listening device for another person to hear at the same time as you. You can use as many additional receivers with each Conversor Pro transmitter to listen to the sound of a speaker, TV or other audio source. Conversor Pro receiver can be used with earphones, headphones or a telecoil enabled hearing aid.
- Technical Information
Housing: Plastic. Matt black finish.
Dimensions: 6.5cm (L) x 3.4cm (W) x 1.7cm (D)
Weight: 61 g.
VHF Frequencies: Channels between 169.4000 -216.9999 MHz
Channel Selection: PLL Synthesizer. Pro auto-tune (PRAT TM) for class selection in school application
Squelch: PSSS TM circuitry switches off audio and switches on local microphone when there is no transmission
Receive Indicator: LED indication of received signal
Battery Type: Rechargeable Li-Ion cell
Charge life: 10 hours approx operation. LED changes from green to red as capacity drops to 25%
Charge Time: 2hrs from full discharge, can be topped up, can be used for 1 hr after a 15min charge.
Frequency Stability: < +/-5kHz (0-40 degrees Celsius)
Frequency Response: +/- 3dB between 300Hz – 4kHz with resistive load
Audio Output: 3.5mm 3-pole (stereo) jack socket
Distortion: <5% at max volume (typical <1%)
S/N ratio: > 50dB
Load Impedance: 32 Ohms
Integral Inductive Loop: Inductive field meets BS 6083 Part 4 in appropriate mode
Write Your Own Review