- Conversor Pro transmitter
- Technical Information
Housing: Plastic. Matt black finish.
Dimensions: 10.2cm (L) x 3.3cm (W) x 2.3cm (D)
Weight: 67 g.
VHF Frequencies: Channels between 169.4000 – 216.9999MHz
Channel Selection: PLL Synthesizer
Battery Type: Rechargeable Li-Ion single cell
Charge life: 8 hours approx. Red LED battery warning
Charge Time: 2hrs from full discharge can be topped up
RF Power and Range: <10mW Outside; up to 300 feet. Inside; 90 to 150 feet typical
Mic muting: Mic muted when line input is connected
Maximum Deviation: +/- 15 kHz
Spurious Emission: Below maximum ETSI permitted limits
Frequency Stability: < +/-5kHz (0-40 degrees Celsius)
Frequency Response: +/- 3dB between 300Hz – 4kHz with resistive load
Microphone: Switchable omni / undirectional Electret microphones
Omni Field: Sensitive to all directions
Front to Back Ratio: Up to 30dB reduction of rearward sound @ 1kHz and up to 15dB reduction to the sides
Line Input Sensitivity: 100mV RMS @ 10kohms, stereo mini-jack
Sensitivity: Soft-limited, two threshold levels for both line and microphone inputs.
Battery Indicator Light: Light changes from green to red, indicating 25% battery capacity remaining
Write Your Own Review
- Brochure & User Guide