- Conversor Pro TV Pro upgrade kit for your Conversor Pro provides you with two transmitters to use with your Conversor Pro receiver. One for the television and one for when you are out and about.Conversor TV Pro is an ideal companion for watching the television or listening to radio at home. Many TVs do not have sound systems that are compatible with individuals who have a hearing loss. The speakers are either pointing at the floor or are at the back of the TV making it difficult to hear clearly without turning the volume up. Conversor TV Pro is a wireless listening device which lets you to listen to the television or other audio source without increasing the volume on the television and irritating other viewers or listeners. Simply connect the mains power, plug the TV Pro transmitter into the television, place the pendant receiver around the neck, switch the hearing aid to the telecoil setting and listen through the hearing aid or just plug in a set of headphones or earphones.Adding a TV Pro upgrade kit to your Conversor Pro enables you to leave the TV Pro transmitter permanently connected to the TV for use with the Receiver, and then use the Conversor Pro transmitter and receiver for when you want to go out and about.Conversor Pro helps you to hear better in difficult or noisy environments such as a restaurant, meeting place or conference or lecture hall. Conversor Pro also helps you to hear better when listening to the TV. Hearing aids aren't always at their best in busy environments with a lot of background noise. Conversor Pro helps you to focus on the speaker’s voice and reduce the effects of room acoustics and background noise. With Conversor Pro, your desired sounds are clearer and more intelligible so you can feel free to take a more active part in everyday situations. Conversor Pro can also be used with headphones or earphones. Conversor Pro is a versatile wireless FM assistive listening device that provides enhanced sound level and clarity for hard of hearing users. Consisting of a powerful handheld or free-standing microphone and a lightweight pendant receiver that is worn around the neck, Conversor Pro is easy to use. Consisting of a powerful, wireless microphone and a comfortable lightweight pendant receiver. Conversor Pro can be used both to channel one particular sound source, such as a speaker, and also surrounding voices if needed-particularly useful in group scenarios. You can purchase additional receivers for friends, family or group members who are also hearing impaired and want to listen to the speaker at the same time. Receivers can be purchased individually or as part of a Conversor Pro Multipack system.
- Technical Information
Housing: Plastic. Matt black finish.
Dimensions: 10.2cm (L) x 3.3cm (W) x 2.3cm (D)
Weight: 67 g.
VHF Frequencies: Channels between 169.4000– 216.9999MHz
Channel Selection: PLL Synthesizer
Operating voltage: 4.6V DC through standard mains connected PSU.
RF Power and Range: <10mW ; Inside - 90 to 150 feet typical
Mic muting: Mic muted when line input is connected
Maximum Deviation: +/- 15 kHz
Spurious Emission: Below maximum ETSI permitted limits
Frequency Stability: < +/-5kHz (0-40 degrees Celsius)
Frequency Response: +/- 3dB between 300Hz – 4kHz with resistive load
Line Input Sensitivity: 100mV RMS @ 10kohms, stereo mini-jack
Sensitivity: Soft-limited, two threshold levels line inputs.
Write Your Own Review
- Brochure & User Guide